File: //var/log/dmesg
Linux version 2.6.18-398.el5 (mockbuild@builder17.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-55)) #1 SMP Tue Sep 16 20:51:48 EDT 2014
BIOS-provided physical RAM map:
BIOS-e820: 0000000000010000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
Warning only 4GB will be used.
Use a PAE enabled kernel.
3200MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f5b70
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 1048576
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 819200 pages, LIFO batch:31
DMI 2.8 present.
DMI: Apache Software Foundation CloudStack KVM Hypervisor, BIOS 1.15.0-1 04/01/2014
kvm-clock: cpu 0, msr 0:74f9e1, boot clock
Using APIC driver default
ACPI: RSDP (v000 BOCHS ) @ 0x000f5920
ACPI: RSDT (v001 BOCHS BXPC 0x00000001 BXPC 0x00000001) @ 0xbffe1b43
ACPI: FADT (v001 BOCHS BXPC 0x00000001 BXPC 0x00000001) @ 0xbffe19bf
ACPI: MADT (v001 BOCHS BXPC 0x00000001 BXPC 0x00000001) @ 0xbffe1a33
ACPI: HPET (v001 BOCHS BXPC 0x00000001 BXPC 0x00000001) @ 0xbffe1ae3
ACPI: WAET (v001 BOCHS BXPC 0x00000001 BXPC 0x00000001) @ 0xbffe1b1b
ACPI: DSDT (v001 BOCHS BXPC 0x00000001 BXPC 0x00000001) @ 0x(null)
ACPI: PM-Timer IO Port: 0x608
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 7:13 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 7:13 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2 7:13 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Processor #3 7:13 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
Processor #4 7:13 APIC version 20
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
Processor #5 7:13 APIC version 20
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
Processor #6 7:13 APIC version 20
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
Processor #7 7:13 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c4000000 (gap: c0000000:3effc000)
TSC: Frequency read from the hypervisor
Detected 2199.996 MHz processor.
kvm-clock: cpu 0, msr 0:3011d61, primary cpu clock
Built 1 zonelists. Total pages: 1048576
Kernel command line: ro root=/dev/hda1
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0778000 soft=c0758000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3103300k/4194304k available (2223k kernel code, 41048k reserved, 922k data, 232k init, 2228096k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0
hpet0: 3 64-bit timers, 100000000 Hz
Using HPET for base-timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199996)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 178bfbff 28100800 00000000 02000000 f7fa3203 00000000 00000121
CPU: After vendor identify, caps: 178bfbff 28100800 00000000 02000000 f7fa3203 00000000 00000121
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: 178bf3ff 28100800 00000000 12000140 f7fa3203 00000000 00000121
MCE: Machine Check Exception Reporting is disabled.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
CPU0: Intel Core Processor (Broadwell, no TSX) stepping 02
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 11000
CPU 1 irqstacks, hard=c0779000 soft=c0759000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4401.20 BogoMIPS (lpj=2200602)
CPU: After generic identify, caps: 178bfbff 28100800 00000000 02000000 f7fa3203 00000000 00000121
CPU: After vendor identify, caps: 178bfbff 28100800 00000000 02000000 f7fa3203 00000000 00000121
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: 178bf3ff 28100800 00000000 12000140 f7fa3203 00000000 00000121
CPU1: Intel Core Processor (Broadwell, no TSX) stepping 02
SMP alternatives: switching to SMP code
Booting processor 2/2 eip 11000
CPU 2 irqstacks, hard=c077a000 soft=c075a000
Initializing CPU#2
Calibrating delay using timer specific routine.. 4399.65 BogoMIPS (lpj=2199829)
CPU: After generic identify, caps: 178bfbff 28100800 00000000 02000000 f7fa3203 00000000 00000121
CPU: After vendor identify, caps: 178bfbff 28100800 00000000 02000000 f7fa3203 00000000 00000121
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU: After all inits, caps: 178bf3ff 28100800 00000000 12000140 f7fa3203 00000000 00000121
CPU2: Intel Core Processor (Broadwell, no TSX) stepping 02
SMP alternatives: switching to SMP code
Booting processor 3/3 eip 11000
CPU 3 irqstacks, hard=c077b000 soft=c075b000
Initializing CPU#3
Calibrating delay using timer specific routine.. 4400.56 BogoMIPS (lpj=2200284)
CPU: After generic identify, caps: 178bfbff 28100800 00000000 02000000 f7fa3203 00000000 00000121
CPU: After vendor identify, caps: 178bfbff 28100800 00000000 02000000 f7fa3203 00000000 00000121
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU: After all inits, caps: 178bf3ff 28100800 00000000 12000140 f7fa3203 00000000 00000121
CPU3: Intel Core Processor (Broadwell, no TSX) stepping 02
SMP alternatives: switching to SMP code
Booting processor 4/4 eip 11000
CPU 4 irqstacks, hard=c077c000 soft=c075c000
Initializing CPU#4
Calibrating delay using timer specific routine.. 4575.85 BogoMIPS (lpj=2287927)
CPU: After generic identify, caps: 178bfbff 28100800 00000000 02000000 f7fa3203 00000000 00000121
CPU: After vendor identify, caps: 178bfbff 28100800 00000000 02000000 f7fa3203 00000000 00000121
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU: After all inits, caps: 178bf3ff 28100800 00000000 12000140 f7fa3203 00000000 00000121
CPU4: Intel Core Processor (Broadwell, no TSX) stepping 02
SMP alternatives: switching to SMP code
Booting processor 5/5 eip 11000
CPU 5 irqstacks, hard=c077d000 soft=c075d000
Initializing CPU#5
Calibrating delay using timer specific routine.. 4398.13 BogoMIPS (lpj=2199067)
CPU: After generic identify, caps: 178bfbff 28100800 00000000 02000000 f7fa3203 00000000 00000121
CPU: After vendor identify, caps: 178bfbff 28100800 00000000 02000000 f7fa3203 00000000 00000121
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU: After all inits, caps: 178bf3ff 28100800 00000000 12000140 f7fa3203 00000000 00000121
CPU5: Intel Core Processor (Broadwell, no TSX) stepping 02
SMP alternatives: switching to SMP code
Booting processor 6/6 eip 11000
CPU 6 irqstacks, hard=c077e000 soft=c075e000
Initializing CPU#6
Calibrating delay using timer specific routine.. 4400.70 BogoMIPS (lpj=2200352)
CPU: After generic identify, caps: 178bfbff 28100800 00000000 02000000 f7fa3203 00000000 00000121
CPU: After vendor identify, caps: 178bfbff 28100800 00000000 02000000 f7fa3203 00000000 00000121
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
CPU: After all inits, caps: 178bf3ff 28100800 00000000 12000140 f7fa3203 00000000 00000121
CPU6: Intel Core Processor (Broadwell, no TSX) stepping 02
SMP alternatives: switching to SMP code
Booting processor 7/7 eip 11000
CPU 7 irqstacks, hard=c077f000 soft=c075f000
Initializing CPU#7
Calibrating delay using timer specific routine.. 4401.10 BogoMIPS (lpj=2200552)
CPU: After generic identify, caps: 178bfbff 28100800 00000000 02000000 f7fa3203 00000000 00000121
CPU: After vendor identify, caps: 178bfbff 28100800 00000000 02000000 f7fa3203 00000000 00000121
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 3
CPU: After all inits, caps: 178bf3ff 28100800 00000000 12000140 f7fa3203 00000000 00000121
CPU7: Intel Core Processor (Broadwell, no TSX) stepping 02
Total of 8 processors activated (35377.21 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Using local APIC timer interrupts.
WARNING calibrate_APIC_clock: the APIC timer calibration may be wrong.
kvm-clock: cpu 1, msr 0:3018b25, secondary cpu clock
kvm-clock: cpu 2, msr 0:301f8e9, secondary cpu clock
kvm-clock: cpu 3, msr 0:30266ad, secondary cpu clock
kvm-clock: cpu 4, msr 0:302d471, secondary cpu clock
kvm-clock: cpu 5, msr 0:3034235, secondary cpu clock
kvm-clock: cpu 6, msr 0:303aff9, secondary cpu clock
kvm-clock: cpu 7, msr 0:3041dbd, secondary cpu clock
Brought up 8 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=136 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=52 bytes
sizeof(skbuff)=176 bytes
migration_cost=4273,1145
checking if image is initramfs... it is
Freeing initrd memory: 2577k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd1dc, last bus=0
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.1: reg 20: [io 0xc0e0-0xc0ef]
pci 0000:00:01.2: reg 20: [io 0xc0c0-0xc0df]
PCI quirk: region 0600-063f claimed by PIIX4 ACPI
PCI quirk: region 0700-070f claimed by PIIX4 SMB
pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref]
pci 0000:00:02.0: reg 14: [mem 0xfebb0000-0xfebb0fff]
pci 0000:00:02.0: reg 30: [mem 0xfeba0000-0xfebaffff pref]
pci 0000:00:03.0: reg 10: [mem 0xfeb80000-0xfeb9ffff]
pci 0000:00:03.0: reg 14: [io 0xc000-0xc03f]
pci 0000:00:03.0: reg 30: [mem 0xfeb00000-0xfeb7ffff pref]
pci 0000:00:04.0: reg 10: [io 0xc040-0xc07f]
pci 0000:00:04.0: reg 14: [mem 0xfebb1000-0xfebb1fff]
pci 0000:00:04.0: reg 20: [mem 0xfe000000-0xfe003fff 64bit pref]
pci 0000:00:05.0: reg 10: [io 0xc080-0xc0bf]
pci 0000:00:05.0: reg 20: [mem 0xfe004000-0xfe007fff 64bit pref]
pci 0000:00:06.0: reg 10: [mem 0xfebb2000-0xfebb200f]
host bridge window [io 0x0000-0x0cf7] (ignored)
host bridge window [io 0x0d00-0xffff] (ignored)
host bridge window [mem 0x000a0000-0x000bffff] (ignored)
host bridge window [mem 0xc0000000-0xfebfffff] (ignored)
host bridge window [mem 0x240000000-0x2bfffffff] (ignored)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Using TSC for driving interrupts
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
type=2000 audit(1772289106.929:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 4014561C61E8FB9E
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Limiting direct PCI/PCI transfers.
PCI: PIIX3: Enabling Passive Release on 0000:00:01.0
Activating ISA DMA hang workarounds.
Boot video device is 0000:00:02.0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:01: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX3: IDE controller at PCI slot 0000:00:01.1
PIIX3: chipset revision 0
PIIX3: not 100% native mode: will probe irqs later
pci 0000:00:01.1: setting latency timer to 64
ide0: BM-DMA at 0xc0e0-0xc0e7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xc0e8-0xc0ef, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: QEMU HARDDISK, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 335544320 sectors (171798 MB) w/256KiB Cache, CHS=20886/255/63, (U)DMA
hda: cache flushes supported
hda: hda1
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
input: AT Translated Set 2 keyboard as /class/input/input0
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports S3<6>Time: kvm-clock clocksource has been installed.
S4 S5)
Initalizing network drop monitor service
Freeing unused kernel memory: 232k freed
Write protecting the kernel read-only data: 419k
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:01.2[D] -> Link [LNKD] -> GSI 11 (level, high) -> IRQ 11
uhci_hcd 0000:00:01.2: setting latency timer to 64
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c0c0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
SCSI subsystem initialized
libata version 3.00 loaded.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel@redhat.com
device-mapper: dm-raid45: initialized v0.2594l
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
input: QEMU QEMU USB Tablet as /class/input/input2
input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: hda1: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 2736130
ext3_orphan_cleanup: deleting unreferenced inode 3038744
ext3_orphan_cleanup: deleting unreferenced inode 1228833
ext3_orphan_cleanup: deleting unreferenced inode 1228832
ext3_orphan_cleanup: deleting unreferenced inode 1228831
ext3_orphan_cleanup: deleting unreferenced inode 2736131
ext3_orphan_cleanup: deleting unreferenced inode 3129516
ext3_orphan_cleanup: deleting unreferenced inode 11538699
ext3_orphan_cleanup: deleting unreferenced inode 10092571
EXT3-fs: hda1: 9 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
input: PC Speaker as /class/input/input3
Intel(R) PRO/1000 Network Driver - version 7.3.21-k4-3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 10 (level, high) -> IRQ 10
e1000 0000:00:03.0: setting latency timer to 64
e1000: 0000:00:03.0: e1000_probe: (PCI:33MHz:32-bit) 06:14:9e:00:30:d6
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
piix4_smbus 0000:00:01.3: Found 0000:00:01.3 device
hdc: ATAPI 4X DVD-ROM drive, 512kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.20
i6300ESB timer: initialized (0xf88d4000). heartbeat=30 sec (nowayout=0)
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKD] -> GSI 11 (level, high) -> IRQ 11
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 10 (level, high) -> IRQ 10
FDC 0 is a S82078B
lp: driver loaded but no devices found
ACPI: Power Button (FF) [PWRF]
ACPI: Mapper loaded
dell-wmi: No known WMI GUID found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.6 loaded
loop: loaded (max 8 devices)
EXT3 FS on hda1, internal journal
Adding 1048568k swap on /swapfile. Priority:-1 extents:266 across:1082812k